Rapid V2 Line Follower Robot Kit - Unassembled

Meet Our new Design Rapid V2 Arduino Based Line Follower Robot Kit!

It is a preferred robot kit for all robot competitions, project assignments, robotics and arduino trainings.

This kit ship Unassembled. 

It is a robot suitable for national and international robot competitions, we provide as free the Arduino code with PID algorithm that you can participate in the competitions. 

The installation manual of the product and the necessary installation programs are sent to you by e-mail. (Assembly takes approximately 50 minutes) It is specially produced for MEB Robot Competition and other Robot Competitions.

In order to keep the gravity at the center of robot, which is an important element in line follower robots, the robot's motors and battery are specially placed at the back of the body so that it does not lift the front in sudden movements and climbs the ramps more easily in competitions. In this way, the handling of your robot will be more stable.

With the 2 dip switches on the robot controller board, you can choose the track or based speedo of the robot,using dip switches as tactices in the robot before the start and select the software you want instantly. With this feature, you will be one step ahead of other line follower robots!

You can control the Rapid V2 Arduino Line Follower Robot Kit by purchasing a bluetooth unit by update the program on your phone or tablet. In addition,in this way your robot can use remotely, you can instantly determine the maximum speed, average speed, PID, etc. You can control the Rapid V2 Arduino Line Follower Robot Kit by purchasing a bluetooth unit by update the program on your phone or tablet. In addition,in this way your robot can use remotely, you can instantly determine the maximum speed, average speed, PID, etc.

General Properties of the Materials in the Kit;

Rapid Line Follower Board: It is a very practical line follower robot board that can be control with an arduino nano. With the 2 dip switches on the control board, you can choose the track or based speed in the competitions and send the track information to the robot before the training.

Arduino Nano: It is the latest version of Arduino development board. Digital I/O: It Has 14 Pins (6 PWM Supported) Pin Structure. The software of the robot is in this board.

TB6612FNG Dual Motor Driver Circuit: With Toshiba TB6612FNG motor driver, two DC motors can be controlled with 1.2A continuous and 3.2A instantaneous current. You can control the direction and speed of 2 dc motors independently of each other. Combined with an arduino, it creates a great platform for projects such as line follower robots, rc vehicles, mobile or autonomous robots.

QTR-8A Infrared Sensor: Originally designed for line follower robots, this sensor board contains 8 IR LED/phototransistor pairs placed 1cm apart. It is mostly preferred in line follower robots because it works stably and smoothly. Do not use non-original QTR Sensors to avoid disappointment in competitions.

12V 2500 Rpm Force-Up Dc Motor: Micro geared motors with 2500 Rpm speed are used in our robot kit. You can put forward high-quality and ambitious projects with these high-quality motors, which are the preference of the robots that are ranked in the competitions. We do not recommend you to participate in competitions with lower rpm engines.

BOND Silicone Wheels: Domestic production silicone wheels, which have been used by many teams for years in line with robot projects, have been preferred as wheels. With its perfect grip surface, your robot will travel on the track without skidding.

You can buy our robot kit disassembled or assembled, besides the kit, software with PID program for competitions is provided free of charge, you can develop this software and achieve much better success.

 

Rapid Arduino Line Follower Robot Kit Materials List is Below;

• 1 x Rapid Line Follower Robot Board (Includes Arduino Nano + TB6612FNG)
• 1 x MZ80 Object Sensor - 80cm Range Infrared Sensor
• •2 x 12V 2500 Rpm Force-Up DC Motors (High Quality Line Follower Motors)
• 1 x QTR-8A Infrared Line Sensor – Analog
• 1 x Bond Silicone Wheel Set
• 2 x 16mm Dc Motor Holder (Special Production)
• 2 x Plastic ball caster Wheels
• 1 x Rapid Line Follower Robot Body
• 1 x 11.1Volt Lipo Battery between 300-500mAh
• 1 x Cable Set
• 1 x Consumables (Nut+Bolt etc. for assembly)

All spare parts of the Robot Kit are always in stock, we guarantee that we will always support you with our pre-sales and after-sales technical support team. 

You can ask all your questions about our robot kit without hesitation, by contacting us through the contact section.